Removing a fuse assembly containing asbestos

  1. 1
  2. 2
  3. 3
1 Use the right kit
  • Cover work area with plastic sheets secured with tape to help catch waste
  • Wear a disposable, correctly fitted FFP3 face mask and Type 5 disposable overalls
  • Wear the overalls one size too big and put the legs over the top of footwear
  • Do not re-use disposable overalls and masks
2 Keep dust down
  • Make sure an electrician has isolated the fuse box and remove all connections to it
  • Unplug the fuse carrier and put it in a plastic sack
  • Use the nozzle of a Class H vacuum cleaner to clean the fuse holder
  • Hold the nozzle of the vacuum cleaner by the screws of the fuse holder whilst unscrewing them
  • Put the screws and fuse holder in a plastic sack
  • Vacuum the surfaces and wipe with a damp cloth
  • Wipe your tools and put the used cloth in the plastic sack
  • Fit a new non-asbestos fuse assembly
3 Clean up properly
  • Use a damp cloth or Class H vacuum cleaner with a special filter to clean up
  • Do not use a domestic vacuum cleaner or a brush as these will spread asbestos fibres into the air
  • Double bag all waste including masks, overalls, cloths and plastic sheets in plastic sacks, seal with tape and label as asbestos waste
  • Contact the local tips in your area to find one that accepts asbestos waste
Share this how-to guide